Led rope light – can add ambience to any space of home. This home lighting solution has become increasingly popular because it is thin and easy to place behind work or other coordination centers for creative background lighting. On the other hand, LED rope lighting uses less power than traditional incandescent light bulbs. First, Measure the space before buying your LED rope lighting and get a rope that will span the space. It is easier to get a long rope for all the space than to string several smaller ropes. Make sure the clips are large enough to accommodate the diameter of the LED string light before nailing them; the thickness of the rope depends on the make and model.
Nail plastic cable clips half way into the installation area at regular intervals. Do you want to leave some space to slip on the led rope light before nailing it in the clip all the way — unless, of course, buying clips that still have room for the rope, even after That are completely nailed. If you want the rope to hang up a little, then leave plenty of space between each clip; If you want the LED rope lighting to be tense, place the clips about 8 inches apart. Hang the rope from the clips. Finish nailing the clips, being careful not to accidentally hit the LED light string with your hammer.
Use duct tape to cover parts of the LED string light that you do not want to illuminate. This step is especially useful if you are winding the led rope light up a wall to go behind an image frame or an artistic creation. Covering the exposed rope will allow the exclusive backlight. To mix with the wall, you can also use the texture tape and paint the tape after it has been glued to the string. Plug your LED light cord into a standard wall outlet. Some light strings have “on” and “off” switches, others just turn on when they are plugged in.rope light installation, rope light ideas, thin rope lights, clips for rope lights, diy led ceiling lights, rope lights ideas, rope lighting ideas, cabinet rope lighting, led light ropes, thin led rope light